Common Objects (0X6Nnn); 0X6007/0 Abort Connection Option Code (Unsigned 8) - BONFIGLIOLI ACTIVE Manual

8.3
8.3.1
The object abort connection option code specifies the operational behaviour of the
frequency inverter if the bus connection fails. This is recognised via the CAN controller
(bus OFF), guarding or heartbeat.
This object corresponds with the parameter
Note:
18
18

Common objects (0x6nnn)

0x6007/0 abort connection option code (unsigned 8)

Operation mode
0 -no reaction Operating point is maintained
1 -Error Switch-off and display of the error report
Switch-off Status change - "Switched on" to "Operation released",
2 -
Drive mechanism is stopped with stopping behaviour
Quick stop Status change - "Switched on" to "Operation released",
3 -
Drive mechanism is stopped with emergency stop ramp
The object 0x605A/quick_stop_option_code has not been implemented.
The operational behaviour for the quick stop is set as if this object has
been set to the value 2.
For the quick stop, this means: decelerate on the quick stop ramp and
switch over when zero has been reached.
Object 0x6007/0
Function
CAN Error behaviour
388.
06/05
06/05