0X1008/0 Manufacturer Device Name (Visible String); 0X1009/0 Manufacturer Hardware Version (Visible String); 0X100A/0 Manufacturer Software Version (Visible String); 0X100C/0 Guard Time (Unsigned 16) - BONFIGLIOLI ACTIVE Manual

8.1.3
The device name is stated as a number of ASCII characters (visible string). This object
enables device identification within the network.
Example :
8.1.4
The device version is stated as a number of ASCII characters (visible string). The
device version can be read via object 0x1009/0. The string available in the frequency
inverter under the parameter
Example :
8.1.5
The software version is displayed via the object 0x100A/0 as a number of ASCII
characters (visible string). The string available in the frequency inverter under the
parameter
Example :
8.1.6
The response monitoring time is calculated by the multiplication of the object "Guard
Time" and "Lifetime Factor". The object 0x100C/0 defines the "Guard Time" in steps
of a millisecond. The statement "Guard Time" = 0 deactivates the guarding monitoring
function.
8.1.7
The object "Lifetime Factor" extends the Guard Time by the set number of cycles. The
setting of "Lifetime Factor" = 0 deactivates the guarding monitoring function.
8.1.8
The setting of the identifier and thus the definition of the priority for the emergency
message is done with object 0x1014/0.
The default figure of the identifier is 128 + Node ID.
06/05
06/05

0x1008/0 Manufacturer Device Name (visible string)

"ACT 10"
0x1009/0 Manufacturer Hardware Version (visible
string)
Device type name
"ACT 10-1 ........................."
0x100A/0 Manufacturer Software Version (visible
string)
Inverter software version
"V4.0.1 ...."

0x100C/0 Guard Time (unsigned 16)

0x100D/0 Lifetime Factor (unsigned 8)

0x1014/0 Emergency ID (unsigned 32)

Bit 31
valid / not valid
Bit 31 : 0 = EMCY existent / valid
1 = EMCY non-existent / not valid
14 is read.
12 is read.
Object 0x1014/0
Bit 30 to Bit 11
not used
Bits 10 to Bit 0
11-bit identifier
13
13