Table of Contents
Advertisement
Replacing the high and low beam bulbs
Before replacing a burnt-out bulb, make sure that the
new one matches the voltage and wattage
specifications in paragraph "Electric System".
Always ensure that the new bulb you have installed
operates properly before refitting any parts you have
removed.
(Fig. 235) shows the location of the LED parking lights
(1), the LED low beams (2) and the high beam bulbs
(3).
To reach the headlight bulbs, fully steer handlebar to
the opposite side of the bulb to be removed (steer
handlebar to the left to remove the RH bulb and vice
versa).
2
3
1
Fig. 235
309
Advertisement
Table of Contents
