Turn adjuster (3) on the fork bottom end front side
with a flat-blade screwdriver to adjust compression.
To change preload of the spring inside each fork leg,
turn the hex. adjuster (2), with a 22 mm hexagon
wrench. By turning adjusters (1 and 3) you will hear
some clicks; each click corresponds to a damping
setting. The stiffest damping setting is obtained with
the adjuster turned fully clockwise to the "0" position.
STANDARD settings are as follows:
compression: 12 clicks from fully closed position.
rebound: 13 clicks from fully closed position.
Adjust both fork legs to same settings.