Table of Contents
Advertisement
Repeat the procedures until you confirm all the 4
digits of the PIN CODE.
After pressing button (4) to confirm the fourth and last
figure, the 4-digit code stops flashing.
Press button (4) for 2 seconds to check the entered
PIN CODE. After 2 seconds:
-
if the PIN CODE is correct (D), the instrument
panel shows "OK" flashing for 2 seconds,
followed by "N: " (new) and four flashing dashes
"- - - -" relevant to the new PIN CODE (F);
-
if the PIN CODE is not correct (E), the instrument
panel shows "ERR." flashing for 2 seconds,
followed by "EXIT".
159
Advertisement
Table of Contents
