Clock Setting - Ducati Multistrada 1200 2016 Owner's Manual

Table of Contents

Advertisement

Clock setting

This function allows user to set or adjust the time.
You enter the Setting Menu. Select "CLOCK SET"
option, by pressing button (1) or (2).
Once function is highlighted, press button (4). You
open the "CLOCKSET" Menu.
It is possible to set the clock as follows:
-
the "AM" indication starts flashing;
-
if you press button (2) the "PM" indication
starts flashing;
-
press button (1) to go back to previous step.
-
press button (4) to shift to hour setting, hours will
start flashing;
-
each time you press button (2), the digit will
increase by one hour. If you hold button (2)
down, the number increases cyclically in
steps of one hour every second (when the
button is held depressed, the hours do not
flash);
-
pressing button (4) gives access to the minute
setting mode; minutes start to flash;
-
each time you press button (2), the digit will
increase by 1 minute. If you hold button (2)
pressed, the count increases cyclically in
steps of 1 minute every second;
-
if button (2) is kept pressed for more than 5
seconds, steps increase in steps of 1 every
100 ms (seconds will not flash while button
(2) is pressed).
To confirm (store) the new set time press button (4).
The EXIT box starts flashing, press button (4) to go
back to the setting menu.
To quit, press button (4).
Note
Every time the battery is disconnected, the
clock is reset and must be set again by the user.
169

Advertisement

Table of Contents
loading

Table of Contents