Replacing The High And Low Beam Bulbs - Ducati Diavel ABS 2012 Owner's Manual

Replacing the high and low beam bulbs

Before replacing a blown bulb, make sure that the
replacement bulb has the same voltage and power as
that specified in the paragraph "Electrical System"
on page 213. Always check that the bulb functions
before reassembling removed parts.
fig. 163 indicates the position of the low beams (LO),
high beams (HI) and led parking lights (1).
Headlight
Important
Have the high and low beam bulbs replaced by
a Ducati Dealer or an Authorized Service Center.
Warning
The headlight might fog up if the vehicle is used
under the rain or after washing.
Switch headlight on for a short time to dry up any
condensate.
LO
HI
1
fig. 163
191