Replacing the high and low beam bulbs
Before replacing a burnt out light bulb, ensure that
the replacement bulb has the same voltage and
power rating as specified on page 130 under
"Electrical system". Always ensure that the new bulb
you have installed operates properly before refitting
any parts you have removed.
Shown in fig. 80 are the locations of the low beam
(LO) high beam (HI) bulb (1) and parking light bulb (2).
Headlight
Important
Have the high/low beam bulb replaced by a
Ducati Dealer or an authorised Service Centre.
Warning
The headlight might fog up if the vehicle is used
under the rain or after washing.
Switch headlight on for a short time to dry up any
condensate.
1
2
fig. 80
109