Table of Contents
Advertisement
Customising the Riding Mode: Reset to
default settings (DEFAULT)
This function allows restoring the default values set
by Ducati for the parameters associated to a specific
riding mode.
You enter the Setting Menu. Select the R.M. (Riding
mode) option by pressing button (1) or (2).
Once function is highlighted, press button (4). You
open the R.M. Menu (Riding mode).
Select the desired riding mode (SPORT, TOURING,
URBAN or ENDURO), by pressing button (1) or (2).
After selecting the desired riding mode (arrow beside
the flashing riding mode), press button (4).
Select DEFAULT (DEFAULT box flashing) by pressing
button (1) or (2). Once desired parameter is
highlighted, keep button (4) pressed for 2 seconds.
After 2 seconds the arrow on the Riding Mode left
side starts flashing and blinking dashes will be
displayed instead of all parameters (ENGINE, DTC,
DWC and ABS). Then the display shows "DF-OK" for
2 seconds to indicate that the default parameters
have been restored. After 2 seconds, the "EXIT" box
starts flashing; press button (4) to quit and go back to
the Setting Menu.
151
Advertisement
Table of Contents
