Customising The Riding Mode: Abs Setting - Ducati Multistrada 1200 2016 Owner's Manual

Customising the Riding Mode: ABS setting

This function disables or sets ABS level for the
selected riding mode. You enter the Setting Menu.
Select the R.M. (Riding mode) option by pressing
button (1) or (2).
Once function is highlighted, press button (4).
You open the R.M. Menu (Riding mode). Select the
desired riding mode (SPORT, TOURING, URBAN or
ENDURO), by pressing button (1) or (2).
After selecting the desired riding mode (arrow beside
the flashing riding mode), press button (4). You open
the selected riding mode customisation Menu. Select
the parameter to be customised (ABS), by pressing
button (1) or (2). Once the desired parameter is
highlighted, press button (4).
When entering the function, the currently set ABS
level or status starts flashing. Use buttons (1) and (2)
to select the new desired intervention level (from 1
to 3) or the symbol " − " (that identifies the "OFF"
status) and press button (4) to confirm.
The value will become automatically steady and the
message "EXIT" will be highlighted.
To exit the menu and go back to previous page, select
"EXIT" and press button (4). The instrument panel will
148
go back to the previous menu level and it will be
possible to start the "Parameter storage" procedure.
Note
To save the new ABS parameter setting follow
the procedure "Storing Riding Mode settings"
described in paragraph "Parameter storage". If the
user quits the Riding Mode customisation menu
without performing the storing procedure, the just-
selected settings will be lost.