Table of Contents
Advertisement
Customising the Riding Mode: DWC level
setting
This function disables or sets DWC level for the
selected riding mode.
You enter the Setting Menu. Select the R.M. (Riding
mode) option by pressing button (1) or (2). Once
function is highlighted, press button (4).
You open the R.M. menu (Riding mode). Select the
desired riding mode (SPORT, TOURING, URBAN or
ENDURO), by pressing button (1) or (2). Once the
desired riding mode is highlighted (arrow next to the
flashing riding mode), press button (4).
You open the selected riding mode customisation
Menu. Select the parameter to be customised
(DWC), by pressing button (1) or (2). Once the desired
parameter is highlighted, press button (4).
If the DTC is disabled (set to OFF), the DWC
parameter can not be changed and is forced to level
OFF.
When entering the function, the currently set DWC
level or status starts flashing. Use buttons (1) and (2)
to select the new desired intervention level (from 1
to 8) or the symbol " − " (that identifies the "OFF"
status) and press button (4) to confirm.
The value will become automatically steady and the
message "EXIT" will be highlighted.
To exit the menu and go back to previous page, select
"EXIT" and press button (4). The instrument panel will
go back to the previous menu level and it will be
possible to start the "Parameter storage" procedure.
145
Advertisement
Table of Contents
