Monitoring The Switch - Planet Networking & Communication WGS3-2620 User Manual

5.8 Monitoring the Switch

The Network Monitor Menu provides access to port statistics, address tables, STA information, VLANs
registration and forwarding information, multicast groups, and subnet addresses. Each of the screens
provided by these menus is described in the following sections.
Menu
Port Statistics
Layer 2 Address Table
Bridge Menu
VLAN Menu
IP Multicast Registration
1
Table
2
IP Menu
*1: This menu is only displayed if WGS3-2620 is set to Layer 2 mode.
*2: This menu is only displayed on WGS3-404 or WGS3-2620 when it is set to multilayer mode.
.
WGS3 Layer 3 Switch User's Manual
Description
Displays statistics on port traffic, including information from the Interfaces
Group, Ethernet-like MIB, and RMON MIB.
Contains the unicast address table.
Displays Spanning Tree settings for the overall switch and for specific
ports.
Displays ports dynamically learned through GMRP or GVRP, and ports
that are currently forwarding VLAN traffic.
Displays all the multicast groups active on this switch, including the
multicast IP address and the corresponding VLANs.
Displays all the IP subnets used on this switch, as well as the
corresponding VLANs and ports. Also contains the ARP table, routing
table, and multicast menu.
- 201 -