Table of Contents
Advertisement
4.5.7.2 IP Filtering Configuration
If any node presents a security risk, you can filter all traffic for this node by entering its address into the
IP Security Filtering Configuration. Any packet passing through the switch that has a source or
destination IP address matching an entry in this table will be filtered.
NOTE:
To add a IP address to the security filter, use <Add>. To delete an address, highlight it with the
cursor and select Enter. Use the <Next Page> and <Prev Page> buttons to scroll through the
table. To display a specific page, set the page number in the Page field and then press <Apply>.
To add an entry, press <Add>.
WGS3 Layer 3 Switch User's Manual
- 91 -
Advertisement
Table of Contents
