Arp Table; Routing Table - Planet Networking & Communication WGS3-2620 User Manual

Layer 3 gigabit ethernet switch
Table of Contents

Advertisement

5.8.6.2 ARP Table

Address Resolution Protocol (ARP) defines a method for extracting a host's Ethernet address from its
Internet address. This table shows the IP-to-MAC address cache discovered via ARP.
Parameter
Description
IP Address
IP addresses for which ARP has resolved the physical address through a broadcast
message.
MAC Address
MAC address that maps to the corresponding IP address.
VLAN
The VLAN group to which this host has been assigned.
Port
The port this to which host device is attached. (Port "0" refers to an interface defined on
this switch.)

5.8.6.3 Routing Table

The Routing Table lists the routes through which all recognized Ethernet networks (and corresponding
VLANs) can be reached. This table includes all routes learned through routing protocols or manual
configuration.
Parameter
Description
Destination
A destination network, subnet or host.
Network
Destination Mask
The subnet mask that specifies the bits to match. A routing entry will be used for a
packet if the bits in the address set by the destination mask match the Destination
Network.
WGS3 Layer 3 Switch User's Manual
- 215 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgs3-404

Table of Contents