Layer 2 Menu - Planet Networking & Communication WGS3-2620 User Manual

4.5.2 Layer 2 Menu

The Layer 2 menu contains options for port configuration, port mirroring, port trunking and static
unicast/multicast address configuration. These menu options are described in the following sections.
Menu
Port Configuration
Mirror Port Configuration
Port Trunking Configuration
Static Unicast Address
Configuration
Static Multicast Address
Configuration
WGS3 Layer 3 Switch User's Manual
Description
Enables any port, enables/disables flow control, and sets
communication mode to auto-negotiation, full duplex or half duplex.
Sets the source and target ports for mirroring.
Specifies ports to group into aggregate trunks.
Used to manually configure host MAC addresses in the unicast table.
Used to manually configure host MAC addresses in the multicast
table.
- 39 -