Static Unicast Address Table - Planet Networking & Communication WGS3-2620 User Manual

5.7.1.4 Static Unicast Address Table

The Static Unicast Address Table can be used to assign the MAC address for a host device to a specific
port on this switch. Static unicast addresses are never aged out, and cannot be learned by another port.
If any packets with a source address specified in this table enter another port, they will be dropped. The
Static Unicast Address Table is described in the following figure and table.
Parameter Description
MAC Address The MAC address of a host device attached to this switch.
Port The port to which the host device is attached.
NOTE: To assign an address to a specific port, enter it in the MAC Address field, select the
corresponding port, and press Save. To delete an address, click
required entry.
WGS3 Layer 3 Switch User's Manual
- 161 -
and press Delete for the