Ip Menu; Displaying Subnet Information - Planet Networking & Communication WGS3-2620 User Manual

Layer 3 gigabit ethernet switch
Table of Contents

Advertisement

5.8.6 IP Menu

This menu contains IP subnets information, the ARP cache, routing table, as well as multicast groups
and multicast routing information.
Menu
Description
Subnet
Displays all the IP subnets configured on this switch, as well as the corresponding
Information
VLANs and ports.
ARP Table
Shows the IP-to-MAC addresses discovered by ARP.
Routing Table
Shows the routes through which all recognized Ethernet networks (and the
corresponding VLAN) can be reached.
Multicast Table Displays all the multicast groups active on this switch, including the multicast IP address
and the corresponding VLANs. Also includes the IGMP registration table, the multicast
forwarding cache, and DVMRP routing information.
OSPF Table
Displays a link state advertisement summary, the neighbor table, and the virtual
neighbor table.

5.8.6.1 Displaying Subnet Information

You can display a list of all the IP interfaces configured on this switch. This table includes the gateway
address, corresponding VLAN, and member ports that use this address.
Parameter
Description
The address for an IP interface on this switch.
IP Address
Subnet Mask
A template that identifies the address bits in the host address used for routing to
specific subnets. Each bit that corresponds to a "1" is part of the network / subnet
number; each bit that corresponds to "0" is part of the host number.
VLAN
The VLAN group associated with this IP interface.
Port Members
The ports that can be reached through this IP interface.
WGS3 Layer 3 Switch User's Manual
- 214 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgs3-404

Table of Contents