Displaying Existing Licenses Of The Simotion Device - Siemens SIMOTION SCOUT Configuration Manual

Configuring/parameterizing
6.13 Licensing runtime
have been saved and compiled. If you have not yet acquired any licenses, underlicensing is
displayed.
Options for determining license requirements are as follows:
● Offline mode with open project
The required licenses are displayed.
● Online mode with open project
A comparison of the required and actual licenses is displayed.
● Online mode without project
The actual licenses of the selected SIMOTION device are displayed.
Proceed as follows:
1. Select the SIMOTION device in the project navigator.
2. Select Licenses in the context menu.
The required licenses for the project or a comparison of required and actual licenses are
displayed.
3. You can close the window with X or continue with Perform licensing....
The license check, i.e. the inspection of the license keys, is carried out in the target system.
Possible responses in the case of underlicensing are described in the Underlicensing section.
Note
Memory cards can be purchased with integrated runtime licenses, which do not require
separate licensing.
6.13.1.4

Displaying existing licenses of the SIMOTION device

Displaying via accessible nodes
You can use the list of Accessible nodes to determine the specific licenses that have already
been assigned to the SIMOTION device. You can access the data of the SIMOTION device
directly.
Note
This step is not necessary if the required and actual licenses are displayed within a project.
Requirements:
● SIMOTION SCOUT is running
● SIMOTION SCOUT is in online mode
● No projects are open
142
SIMOTION SCOUT
Configuration Manual, 11/2016