Using Lad/Fbd; Overview - Siemens SIMOTION SCOUT Configuration Manual

Configuring/parameterizing
6.6 Programming the SIMOTION application
6.6.3

Using LAD/FBD

6.6.3.1

Overview

Program creation steps
The creation of an LAD/FBD program encompasses the following steps:
1. Create an LAD/FBD source.
2. Create an LAD/FBD program in the LAD/FBD source.
3. Insert LAD/FBD commands in the LAD/FBD program.
4. Save and compile the LAD/FBD program.
120
SIMOTION SCOUT
Configuration Manual, 11/2016