Table of Contents
Advertisement
Assigning programs to tasks
To assign programs to tasks in the execution system, proceed as follows:
1. Double-click in the project navigator below the SIMOTION device on
SYSTEM.
The Execution System window opens in the working area.
2. Assign the required program to the preferred task. In the sample MCC program,
motion.pos_axis and MotionTask_1 task.
– In the tree of the execution system, select the branch ExecutionLevels >
SIMOTION SCOUT
Configuration Manual, 11/2016
OperationLevels > MotionTasks > MotionTask_1.
Figure 6-39
Execution system, tree view of the execution levels and tasks
The MotionTasks window opens on the right of the working area. The programs
pos_axis and LAD_1 as well as programs of the fault source are visible on the Program
assignment tab at Programs.
Configuring/parameterizing
6.7 Configure execution system
EXECUTION
129
Advertisement
Table of Contents
