Table of Contents
Advertisement
Priority of the mode selector switch on the SIMOTION device
The setting of the mode selector switch on the SIMOTION device has priority. SIMOTION
SCOUT can only switch a SIMOTION device to RUN mode if the mode selector switch on the
device is set to 0 or RUN.
● SIMOTION D
You can find the mode selector switch of the D410-2 and D4x5-2 in the lower area of the
front behind the blanking cover.
Figure 7-6
● SIMOTION C
Figure 7-7
● SIMOTION P
With SIMOTION P, the mode selector is displayed via the SIMOTION P Startup application.
You can call this via Start > Programs > SIMOTION P Startup.
For more information, see the SIMOTION P Manual.
SIMOTION SCOUT
Configuration Manual, 11/2016
7.3 Controlling the operating mode with SIMOTION SCOUT
D410-2 and D4x5-2, mode selector switch, switch position 0 (RUN)
SIMOTION C240 module front
Target system
159
Advertisement
Table of Contents
