8. Activate the setting in Control value.
9. Click Control. The active command is highlighted in yellow in the program.
Figure A-11
Monitoring and controlling the variable in the BackgroundTask
The motor now rotates at 6000 rpm and approaches the position 2000 mm. You can check
this by selecting Axis_1 at Axes, opening basicMotion in the symbol browser, and observing
the position. The values are refreshed automatically when an online connection exists.
SIMOTION SCOUT
Configuration Manual, 11/2016
A.2 Creating an example program for axis positioning in SIMOTION SCOUT
Appendix
237