Siemens SIMOTION SCOUT Configuration Manual page 209

Description
The following TCP ports must be enabled (open) for all routers and firewalls in the transmission
link to permit the use of the following services:
Access to a SIMOTION controller / SINAMICS drive:
● ... via SCOUT (or STARTER) engineering software:
– Port 102 (ISO-TSAP (Transport Service Access Point)
– Port 5188 (only for SIMOTION)
– Ping Request (ICMP)
● ... via web browser to the integrated web server:
– Port 80 or 8080 (HTTP or HTTP alternate)
– Port 443 (HTTPS)
● ... via FTP (only for SIMOTION):
– Port 20, 21 (data communication, check)
● ... via TCP or UDP to the user program (only for SIMOTION):
– Possible configurable port numbers are 1024 to 65535
● ... via OPC XML-DA (only for SIMOTION):
– Port 80 or 8080 (HTTP or HTTP alternate)
– Port 443 (HTTPS)
● ... via OPC UA (only for SIMOTION)
– Port 4840
An open port can be verified with the following test, for example:
1)
Under Windows, open the DOS window and enter the command "telnet
<SIMOTION_IP_address> <Port>" (e.g. "telnet 192.168.214.1 102"). The space between
<SIMOTION_IP_address> and the port number to be queried is important. If the screen in the
DOS window turns black or if another window opens, your query has received a response via
the port, i.e. the port is open. If this does not happen or if the query is canceled after some
time with an error message, then SIMOTION does not respond via this port. A SIMOTION
controller responds via port 5188 only if you were online via SCOUT (port 102) previously.
As of SIMOTION SCOUT / STARTER V4.3, ping-based connection monitoring can be
2)
deactivated. Therefore, the Ping Request (ICMP) may not have to be enabled. For this
purpose, open the settings in SIMOTION SCOUT / STARTER at the "Tools" menu command
and remove the checkmark at "Use S7-TCP connection monitoring" in the "CPU Download"
tab.
SIMOTION SCOUT
Configuration Manual, 11/2016
Configuring a further connection (such as HMI)
12.5 TCP ports for access to SIMOTION/SINAMICS
1)
2)
209