Power Sub-System; Mechanical Overview; Ac Power Supply Unit Dimension Overview; Ac Power Supply Unit General Data - Intel H2000WP Technical Manual

®
Intel Server System H2000WP Family TPS
3.

Power Sub-System

The system supports AC 1+1 hot swap power supply module and two power distribution board
which can support 2U rack high density server system. Two different power supply units are
supported: 1200W and 1600W. The single power supply module has Platinum level energy
efficiency, demonstrating climate saver with silver rating.
3.1

Mechanical Overview

The power supply module has a simple retention mechanism to retain the module self once it is
inserted. This mechanism must withstand the specified mechanical shock and vibration
requirements. The power distribution board is fixed in the chassis with screws. This specification
defines a 1+1 hot swap redundancy power supply that supports 2U server system. Using
existing power supply module provided by vendor with updated PMBus* and custom-made
power connector board to support four nodes of Intel
supply should have two outputs: 12V and 12VSB. The input should be auto ranging and power
factor corrected. The PMBus* features included in this specification are requirements for AC
silver rated box power supply for use in server systems based on Intel
H2000WP Family. This specification is based on the PMBus* Specifications part I and II,
revision 1.1.
3.1.1

AC Power Supply Unit Dimension Overview

The casing dimension is W 73.5mm x L 265.0mm x H 39/40mm. The power supply contains a
single 40mm fan. The power supply has a card edge output that interfaces with a 2x25 card
edge connector in the system. The AC plugs directly into the external face of the power supply.

Figure 11. AC Power Supply Unit Dimension Overview

3.1.2

AC Power Supply Unit General Data

Below is general specification data for AC Power Supply Unit.
Revision 1.6
®
Server Board S2600WP. The power
Intel order number: G52418-006
Power Sub-System
®
Server System
17