Intel® Server System SR2500AL
1.6
Hard Drive and Peripheral Bays
The chassis is designed to support several different hard drive and peripheral configurations.
The system includes a hot swap backplane capable of supporting either SAS or SATA drives.
The sixth bay (see letter "B" in the figure below) can optionally be configured to support a sixth
hard drive or 3.5" tape drive.
A.
B.
C.
D.
1.7
Power Sub-system
The power subsystem of the chassis consists of an integrated power distribution board and
module enclosure which is capable of housing up to two 750 Watt power supply modules
supporting 1+0 or redundant 1+1 power configurations. In a 1+1 redundant configuration, each
power supply module is hot-swappable should one fail.
The power sub-system has several integrated management features including:
•
Status LED on each power module
•
Over-temperature protection circuitry
•
Over-voltage protection circuitry
With the addition of server management software, the power subsystem is capable of
supporting several system management features including:
•
Remote Power On/Off
•
Status Alerting
•
FRU Information Reporting
Revision – 1.6
A
D
Figure 9. Front Panel Feature Overview
Slimline Optical Drive Bay
6th HDD Drive or Tape Drive Bay (Optional)
System Control Panel
3.5" Hard Drive Bays (5)
Intel order number D31980-009
0BProduct Overview
B
C
TP02096
7