Status Objects Parameter Window - ABB i-bus KNX SUG/U 1.1 Product Manual

®
ABB i-bus KNX
Commissioning
3.2.4

Status objects parameter window

Send status values
Options:
•
No (update only): The status is updated but not sent.
•
On change: The status is sent when a change occurs.
•
After request: The status is sent when a request occurs.
•
After a change or request: The status is sent when a change or request occurs.
34 2CDC508171D0201 | SUG/U 1.1
No (update only)
On change
After request
After a change or request