Integration In The I-Bus Tool - ABB i-bus KNX SUG/U 1.1 Product Manual

®
ABB i-bus KNX
General
1.2.1 Integration in the i-bus
The device possesses an interface to the i-bus
The i-bus
The i-bus
ETS is not required for the software tool.
A description of the functions is provided in the i-bus
Note
Not all of the device's functions can be operated using the i-bus
Window contact) and the Presence function can only be activated/deactivated via the bus. If a priority is
active, the device cannot be operated with the i-bus
and the i-bus
i-bus
6 2CDC508171D0201 | SUG/U 1.1
®
Tool
®
Tool can be used to read out data and test functions on the connected device.
®
Tool can be downloaded free from our website (www.abb.com/knx).
®
Tool, the device maintains the last state that was set. In other words, commands from the
®
Tool and KNX telegrams have equal priority (exception: priorities).
®
Tool.
®
Tool online help.
®
Tool. Priorities (Forced operation and
®
Tool. If the connection drops between the device