Table of Contents
Advertisement
®
ABB i-bus
KNX
Commissioning
Enable "On/Off delay" function
Options:
•
Yes: Enables the 1-bit group object Deactivate On/Off delay.
Sending a telegram with the value 0 to the On/Off object delays switching off the split unit (i.e. sending the
infrared command) by the parametrized time.
Note
The switching off delay is activated after the download.
No
Yes
Dependent parameter:
On/Off delay
Options:
1...10...255 min
SUG/U 1.1 | 2CDC508171D0201 25
Advertisement
Table of Contents
