Table of Contents
Advertisement
®
ABB i-bus
KNX
Commissioning
Enable group object
"In operation", 1 bit
Options:
•
Yes: Enables the 1-bit group object In operation.
Enable group object
"Request status values" 1 bit
Options:
All status messages can be requested via this group object, provided they have been parametrized with
the option After a change or request.
•
Yes: Enables the 1-bit group object Request status values.
18 2CDC508171D0201 | SUG/U 1.1
No
Yes
Dependent parameters:
Sending
Options:
Value 0
Value 1
Sending cycle time
Options:
1...60...65,535 s
The time interval at which the In operation group object cyclically sends a telegram is set here.
Note
After bus voltage recovery, the group object sends its value after the set sending and switching
delay time.
No
Yes
Dependent parameter:
Request with object value
Options:
0
1
0 or 1
•
0: Sending status messages is requested with the value 0.
•
1: Sending status messages is requested with the value 1.
•
0 or 1: Sending status messages is requested with the values 0 or 1.
Advertisement
Table of Contents
