Functions Parameter Window - ABB i-bus KNX SUG/U 1.1 Product Manual

®
ABB i-bus KNX
Commissioning
3.2.3

Functions parameter window

Function priorities are as follows:
1)
2)
3)
If several priorities are activated at once, the highest priority is executed.
The lower priorities are updated in the background and only executed once the higher priority is
deactivated.
While a priority is active, Presence and Scene are still evaluated, but Boost and other non-priority group
objects are discarded.
Timers (switching off delay, monitoring time) start immediately.
Enable "Forced operation" function
Options:
•
Yes: Enables the 1-bit group object Forced operation.
This enables the corresponding parameter window.
26 2CDC508171D0201 | SUG/U 1.1
Forced operation
Window contact
Presence, scenes, boost and group objects without priority
No
Yes