Table of Contents
Advertisement
®
ABB i-bus
KNX
Device technology
2
Device technology
SUG/U 1.1
2.1
Technical data
Power supply
Connections
Operating and display elements
Protection degree
Protection class
Isolation category
KNX safety extra low voltage
Temperature range
Ambient conditions
Design
Installation
Mounting position
Weight
Housing, color
Approvals
CE marking
The Split Unit Gateway converts KNX
commands to infrared commands which
are used to manage climate control
equipment (split units).
The device is installed near the split unit
in a flush-mounted or wall-mounted box.
The transmission diode in the supplied
cable is bonded to the receiver of the split
unit itself.
Supply voltage
Power loss P
Current consumption
KNX
IR cable connection socket
IR cable
Red LED and button
IP 20 in the installed state
III
Overvoltage category
Pollution degree
SELV 30 V DC
Operation
Storage
Transport
Maximum air humidity
Atmospheric pressure
Dimensions
In a wall box
any
0.02 kg
Plastic, halogen free, gray
KNX to EN 50 090-1, -2
In accordance with the EMC directive and low
voltage directive
The device is supplied with power via
the KNX bus voltage; no additional
power supply is required.
®
Via ABB i-bus
KNX (21...31 V DC)
Max. 0.4 W
Max. 12 mA
Bus connection terminal, screwless
Plug-in terminal
Length 2 m
For assignment of the physical address
Compliant to EN 60 529
To EN 61 140
III according to EN 60 664-1
2 to EN 60 664-1
-5 °C...+45 °C
-25...+55°C
-25...+70 °C
95 %, no condensation allowed
Atmosphere up to 2,000 m
39 x 40 x 12 mm (H x W x D)
Flush-mounted or wall-mounted
SUG/U 1.1 | 2CDC508171D0201 7
Advertisement
Table of Contents
