ABB i-bus KNX SUG/U 1.1 Product Manual page 43

®
ABB i-bus KNX
Commissioning
No.
16
This object indicates the status of Forced operation.
1 = Forced operation is activated
0 = Forced operation is deactivated
17
When a telegram with the value 1 is received on this object, the split unit switches off.
No switching off delay can be parametrized.
On receipt of a telegram with the value 0, the unit is restored to the state it was in before being switched off.
18
This object indicates the status of the Window contact function.
1 = Window contact function is activated
0 = Window contact function is deactivated
19
Activating the Presence function (sending a telegram with the value 1 on the object) sets the split unit to its parametrized state
for Presence = 1.
After the (optional) parametrizable monitoring time or on deactivating the Presence function (sending a telegram with the value
0 on the object) the split unit is set to its parametrized state for Presence = 0.
20
The value of this group object indicates the state of the Presence object.
Function
Status Forced operation
Dependent on parameters
Window contact
Dependent on parameter
Status Window contact
Dependent on parameters
Presence
Dependent on parameter
Status Presence
Dependent on parameters
Group object name
Function
Enable "Forced operation" function and
Enable group object "Status Forced operation" 1-bit
Function
Enable "Window contact" function
Function
Enable "Window contact" function and
Enable group object "Status Window contact" 1 bit
Function
Enable "Presence" function
Function
Enable "Presence" function and
Enable group object "Status Presence" 1 bit
Data type Flags
1 bit C, R, T
DPT 1.003
1 bit C, W
DPT 1.019
1 bit C, R, T
DPT 1.019
1 bit C, W
DPT 1.018
1 bit C, R, T
DPT 1.018
SUG/U 1.1 | 2CDC508171D0201 41