Table of Contents
Advertisement
®
ABB i-bus
EIB / KNX
5.2
Parameterisation in ETS
5.2.1
'General'
parameter window'
14
Commissioning
The first step in configuring the TG/S is carried out with the Engineering Tool
Software ETS (from ETS2 version 1.2a onwards).
When the parameter window is retrieved, the 'General' parameter appears
first.
Fig. 5.2.1: 'General' parameter window in the default setting
Objects 1–20
Options:
deactivate
activate
Objects 1 to 20 are communication objects which can be used to transfer
messages from/to the TG/S. If these objects are activated, further parameter
windows appear on which 2 objects can be parameterised each time.
Objects 21–40
Options:
deactivate
activate
Objects 21 to 40 are communication objects which can be used to transfer
messages from/to the TG/S. If these objects are activated, further parameter
windows appear on which 2 objects can be parameterised each time.
Advertisement
Table of Contents
