General; Using The Product Manual - ABB i-bus KNX SUG/U 1.1 Product Manual

®
ABB i-bus KNX

General

1 General
This manual provides detailed technical information concerning the ABB i-bus
Split Unit Gateway.
Split units are HVAC devices which are usually operated by an infrared remote control. The Split Unit
Gateway is installed near the split unit and the transmitter of the supplied cable is bonded to the receiver of
the unit itself. This makes it possible to control the split unit via KNX group commands. The Split Unit
Gateway allows users to integrate the split unit in a KNX system for convenient, energy efficient control.
1.1

Using the product manual

This manual provides detailed technical information on the function, installation and programming of the
ABB i-bus
This manual is divided into the following chapters:
Chapter 1
Chapter 2
Chapter 3
Chapter A
®
KNX device. Explanations on how to use it are accompanied by examples.
General
Device technology
Commissioning
Appendix
®
KNX SUG/U 1.1
SUG/U 1.1 | 2CDC508171D0201 3