Settings - Profibus Communication; Figure 24 Parameter Window For Profibusdp Parameters In Mnavigate; Table 10 Digital Gateway Default Parameters - Profibus Configuration - ABB LVS Digital Manual

CO NF IG UR AT IO NS
7.3 Settings – PROFIBUS Communication
Parameter
PROFIBUS
Slave Address
GSD
Configuration
PLC Timeout
Enable
PLC Timeout
Table 10 Digital Gateway Default Parameters – PROFIBUS configuration
Configuration of the parameters is done via MNavigate
loaded to the Digital Gateway.

Figure 24 Parameter Window for PROFIBUSDP parameters in MNavigate

1 TG C90 80 04
Default Value Range
126 3...125
244 read –
244 read – 124 write
124 write
120 read – 60 write
32 read – 16 write
INSUM 2 Gsd 165A
INSUM 2 Gsd 067e
No Yes, No
10 1...120 seconds
S ET T ING S – PR O FIB US COM MU NI CATI O N
Remarks
PROFIBUS station address
Selects the data length module
definition from the GSD file.
Only for LVS Digital Upgrade
solution :
Support of INSUM 2 GSD for
INSUM 2 Upgrade solution
Activates PLC Time Out parame-
ter
Delay until Failsafe is activated
.
The parameters must then be down-
33