Netwitness Platform 11.2 And Earlier; Connect Powervaults To A Concentrator, Archiver, Decoder, Or Log Decoder Physical Host - Dell PowerVault MD1400 Setup Manual

NetWitness Platform 11.2 and Earlier

Deployment
Tasks
Scenario
Concentrator,
Archiver, Decoder,
and Log Decoder
(Multiple Power-
Vaults)
Hybrid
Connect PowerVaults to a Concentrator, Archiver, Decoder, or Log
Decoder Physical Host
You can connect one or more PowerVaults to a RSA Series 5 or Series 6 Concentrator,
Archiver, Decoder, or Log Decoder physical hosts. You can only add four PowerVaults per port
for a total of eight PowerVaults per PERC H830 (Series 5) RAID controller or five per PERC
H840 (Series 6) RAID controller.
Install PowerVault without Encryption
PowerVault (Dell MD1400) Setup Guide
1. Connect the PowerVaults to the physical host before powering on
the physical host as described in
Concentrator, Archiver, Decoder, or Log Decoder Physical Host
2. Run the
NwArrayConfig.py
PowerVault Installation Scripts on the Decoder, Log Decoder,
Concentrator, or Archiver
3. Restart the services for this host as described in
4. License the services for this host
Refer to the Licensing Guide available through the application Help
option and RSA Link at
for instructions on licensing RSA physical hosts.
1. Connect the PowerVault to the physical host before powering on the
physical host as described in
2. Run the NwArrayConfig.py script as described in
PowerVault Installation Scripts on a Hybrid
3. Restart the services for this host as described in
4. License the services for this host
Refer to the Licensing Guide available through the application Help
option and RSA Link at
for instructions on licensing RSA physical hosts.
Connect PowerVaults to a
script as described in
.
(if they are not already licensed).
https://community.rsa.com/docs/DOC-40370
Connect a PowerVault to a Hybrid
.
(if they are not already licensed).
https://community.rsa.com/docs/DOC-40370
.
Run the
.
Restart the Service
.
Run the
.
Restart the Service
12