FINE mechatronics FS-8000 Instruction Manual page 7

☞
F1,F2,F3 Key
Available to use the end-user demanding by SETUP F21,F22,F23
( SET UP F21 REFERENCE )
☞
COUNT Key
* Unavailable to change the PART deliberately.
☞
G/T KEY
* Avavailable to remove Gross Total in printing
☞ S
/T KEY
* Available to remove Sub Total in printing
☞ CODE
KEY
* Checking CODE.
: CODE key → Checking→CLR(Remove)
* Change or setting CODE.
: CODE key → Inputting changed Key →SET(Change or setting)
☞ HOLD Key
* Possible to choose various functions by SET UP F25.
- Manual HOLD
- Manaul HOLD(Average)
- A stable hold
- Maxium HOLD(1Time only) : Holding the maxium weight value when being maxium
- Maxium HOLD (Continue)
☞ AUTO Key
* Possible to choose various functions by SET UP F24.
- Auto-totallization in holding the weight.
- Available to work the HOLD function by AUTO setting Only.
- Available to work the HOLD function by AUTO setting Only
And to remove the HOLD function when it empty.
- Auto-totallization when the weight is safty
* Possible to choose AUTO/MANUAL by SET UP F19 when the power is ON.
---------------------------------------------------------------------------------
FINE MECHATRONICS
: This keys appear a various data as the end-user demands.
: This Key appears the worked frequence of each PART.
:
The function to print The weight of Gross Total
:
The function to print The weight of Sub Total.
:
The function to check and set Max.6figure CODE of Each PART.
: This key is to set/delete HOLD Functions.
: Holding the moment weight value by HOLD
: Holding Average weight value after pushing HOLD Key
: Holding the weight value when being stable
: Holding a continuous maxium weight
When being new maxium
: This key is to set/delete AUTO Function.
FS8000
.
Key
7