FINE mechatronics FS-8000 Instruction Manual page 33

F13-
F14-
F15-
F16-
F18-
---------------------------------------------------------------------------------
FINE MECHATRONICS
0 If a weight is ZERO("0"),Empty signal will be showed.
Empty Signal will be showed on a weight
( "0" or "under 0")
Empty Signal will be showed on a absolute value
2
Of Empty range
3 It will be showed on "+range","-range".
* The occurrence of Empty will display ZERO LAMP
EMPTY
RANGE
Standard for a weight displayed .
1 Standard for Basic Zero value .
2 Standard for Zero value by TARE setting.
INPUT 1
1
2
3
4
* Input in connecting COM terminal and Input Terminal.
The time to input is over 0.05 sec
* Convert in inputting N/W.
Delete Totalization Information
CLR + SUB TOTAL , Deleting in inputting
CLR + TOTAL
1 Auto deleting in printing Sub-Total,TOTAL
FS8000
EMPTY SIGNAL MODE
SET EMPTY RANGE
Through Setting Empty Range,AUTO Funtion
(TARE,G/T,S/T,HOLD) will be used pratically.
* FIRST SETTING 000010
SET EMPTY STANDARD
EXTERNAL INPUT MODE
INPUT 2
ZERO TARE
ZERO TARE
ZERO TARE
ZERO PRINT
ZERO TARE
.
INPUT 3 INPUT 4
N/W
PRINT
HOLD/Remove HOLD
SUB TOTAL TOTAL
SUB TOTAL TOTAL
G/W
G/W
33