FINE mechatronics FS-8000 Instruction Manual page 29

F-NO
F 00 S & C MODE Convert
F 01 weight unit choice
F 02 weight BACK-UP
F 03 Set ZERO tracking Range
F 04 Set Safty Motion Band
F 05 Set AUTO ZERO Range
F 06 Digital Filter
F 07 Set ZERO Range
Set Delay time of Saftty judgement
F 08
Available ZERO Range setting
F 09
F 10 Selecting a Key Lock
F 11 ZERO,TARE,OPERATE MODE
F 12 TARE weight INPUT MODE
F 13 EMPTY Signal MODE
F 14 SET EMPTY Range Set
F 15 SET EMPTY Standard Set
F 16 External INPUT MODE
F 18 DELETE Totalization information
F 19 Manual,Auto Choice
F 21 User
F 22 User
F 23 User
Set AUTO Function
F 24
Set HOLD Function
F 25
Nomination CODE Number
F 26
F 30 BRUD RATE
F 31 Set Parity Bit
F 32 Set Transmit MODE
F 33 Set Format Transmit DATA
F 34 Insert Transmit DATA (STX)
F 35 Control Interface wire / RS,CS
F 50 Weight choice for output
F 51 BCD OUT Parity
F 60 Weight choice for output
Standard weight choice of Analog Out
F 61
---------------------------------------------------------------------------------
FINE MECHATRONICS FS8000
FUNCTION
F-00 GROUP-SETTING A BASIC WEIGHIG
F-10 GROUP-SETTING A BASIC DEVICE
F-20 GROUP-SETTING CONTROL SYSTEM
key definition
key definition
key definition
F-30 GROUP-SETTING Serial Interface Specification
F-50 GROUP-SETTING BCD Output Specification
F-60 GROUP-SETTING Analog Out Specification
CONTENTS
SETUP & CALIBRATION
kg, ton, lb
NORMAL, BACK-UP
0, 0.5, 1, 2
0.5, 1, 2, 4, 8
0-99 (Auto Zero Range)
0-9 (anomalous decrease)
Max.weight 2, 10, 50, 90%
0-99 (1count = 0.1sec)
1000-20000, No limit
Prohibition & Permit for KEY
Satty,Unsafty
Set Numeral,Actual,Auto TARE
Output Choice when it is ZERO or Empty
Set Empty Range Weight
Display weight,basic ZERO,TARE ZERO
Input terminal function
Delete in Manul/Auto for totalization
Delete in Manul/Auto when Indicator is ON
No definition or Set
No definition or Set
No definition or Set
Choice for Safty,Output,Hold
Hold,Max Hold,Average Hold
No change,increase,decrease in working 1time
300, 600, ........ 38.4 kbps
EVEN, ODD, NO PARITY
Continue,Satty,Totalization,Command.
weight, weight+time, CAS tranmit format
No, Insert
No use(RS422/485), USE
Display,Gross,Net weight
Positive / Negative OUT
Display,Gross,Net weight
Max,display weight,Standard weight
29