Front Panel Description; Lamp - FINE mechatronics FS-8000 Instruction Manual

1-4. FRONT PANEL DESCRIPTION

STEADY ZERO TARE GROSS COM. HOLD AUTO
ZERO

1-4-1. LAMP

▼ STEADY
The condition of STEADY Lamp can set up by F04,F08.
Also,it will be a certerion of weighing for auto function operating.
▼ ZERO : This Lamp will be truned when the weighing device is empty.
The condition of ZERO Lamp can set up by F03,F13.
Also,it will be a certerion of weighing for auto function operating.
▼ TARE : This Lamp will be displayed when TARE weight was set up
(SET-UP F12 REFERENCE)
▼ GROSS : This Lamp will be displayed when the present weight was GROSS.
Avilable to display When TARE was set up.
▼ COM. : This Lamp will be displayed when Serial Interface was connected to
External devices
▼ HOLD : This Lamp will be displayed when HOLD works
▼ AUTO : This Lamp will be displayed when AUTO works
---------------------------------------------------------------------------------
FINE MECHATRONICS
GROSS
TARE
: This Lamp will be turned on the stable weight
FS8000
kg
PART
NET
FS-8000
F1
F2
G/T
COUNT
CODE
HOLD
CLR
PRINT
(SETUP F25 REFERENCE)
(SETUP F24 REFERENCE)
F3
S/T
AUTO
SET
CAL
5