FINE mechatronics FS-8000 Instruction Manual page 31

F05-
(Example)
The range of auto zero will be to 1--30g. At this time,
F05 function is available up to 10 % of full capacity.
F06-
If you use the indicator with conveyer belt system or any other vibrating
appliance, this f06 function will be applied for filtering or absorbing
the vibrating or oscillating weighing value.
F07-
Seting ZERO can be set in the range by ZERO Key or External ZERO Input
Notice : Set Zero Ragne(50%),Load cell Capacity(100kg),Set Zero(50kg)
Then,if the acutual weight is 100kg,it means weighing total 150kg
On a load cell.So,The load cell may be broken.
Please refer to Max.capacity of a load cell.
F08-
F09-
---------------------------------------------------------------------------------
FINE MECHATRONICS
SET AUTO ZERO RANGE
0
This is to make the weight of last two digits as zero automatically.
* First Set 00
99
If the indicator is set to 15kg * 5g and f05-30 ,
0
9
Under 2% of Maxium available weight
1 Under 10% of Maxium available weight
2 Under 50% of Maxium available weight
3 Under 90% of Maxium available weight
SET DELAY TIME OF SAFTY JUDEGEMENT
A weight is a devision range set by F-04 and after time set,it will be a
0
safty display and auto mode.
* First Setting : 10 ( 1 sec)
99
* 0.1sec Delay/per 1count
AVAILABLE ZERO RANGE SETTING
1
FS8000
DIGITAL FILTER
LESS
* Requesting a high speed respoose
(0, 1, 2)
↕
* A general Weighing ( 3,
* A greater vibrating ( 7,8,9 )
MORE
SET ZERO RANGE
Zero value of 1000 ~ 20,000 while working.
No availabel to Zero value while working
Unavailable to set by F02-01( BACK-UP)
,5,6 )
31