Care, Cleaning And Maintenance; For Each Fill; Lever For Cleaning Heating Surfaces; Ignition Openings On Lighting Door And Vertical Grate - Windhager LOGWIN PREMIUM TOUCH Operating Manual

3.

Care, cleaning and maintenance

3. Care, cleaning and maintenance
Cladding:
Clean the boiler cladding with a moist cloth as needed. In the event of heavy soiling, use soapy water or diluted suds
(do not use caustic chemicals or sharp cleaning instruments).
Coasting surfaces:
Every millimetre of soot on the coasting surfaces means about 5 % more fuel consumption. A clean boiler saves fuel
and protects the environment.
Save fuel – always clean the boiler in good time
CAUTION
3.1

For each fill

3.1.1 Lever for cleaning heating surfaces

– Press lever for cleaning heating surfaces 5–10 times – Fig. 28.
Fig. 28 Pressing lever for cleaning heating surfaces 5–10 times
3.1.2 Ignition openings on lighting door
Check ignition openings on lighting door and vertical grate, clear if necessary – Fig. 29.
Fig. 29 Checking the ignition openings
1 Only for LogWIN with automatic ignition (accessories).
The specified cleaning intervals are for guidance only! The cleaning intervals vary de-
pending on the quality of the fuel, the nature of operation and the different operating
phases (e.g. a lot of partial load, the blower spending a lot of time stationary during
operations).
1
and vertical grate
Ignition opening on lighting door
Ignition opening on vertical grate
15