Important Information For System Operators; General Information; Manufacturer's Obligations; Installer's Obligations - Windhager LOGWIN PREMIUM TOUCH Operating Manual

1.

Important information for system operators

1. Important information for system operators
Dear Heating System Owner,
We would like to congratulate you on your new environmentally friendly boiler system. With the purchase of this
high-quality product by Windhager, you have selected a system that provides more comfort and optimised fuel consump-
tion while utilising an environmentally friendly means of saving resources. Your boiler was manufactured under strict
ISO 9001-certified standards, was subjected to extensive tests and all its components are recyclable.
On the following pages we have provided specific information and important tips regarding system operation, unit
functions and cleaning.
Note!
Operation of the boiler together with the InfoWIN Touch display and operating unit is described in a
separate operating manual. Please also pay close attention to these instructions. Familiarity with the
material in this document will allow you to enjoy long-term operation of the unit. We wish you all the best
with your Windhager boiler!
1.1

General information

1.1.1 Manufacturer's obligations

Our products are manufactured in accordance with the essential requirements of the various applicable guidelines. They
therefore carry the label and are supplied with all the required documentation.
Technical details subject to change.
We as the manufacturer cannot be held liable in the following cases:
– Incorrect use of the unit.
– Failure to perform proper maintenance on the unit.
– Incorrect installation of the unit.

1.1.2 Installer's obligations

The installer is the person responsible for installing the unit. The installer must comply with the following instructions:
– Read and follow all instructions supplied with the unit.
– Carry out installation in accordance with the applicable standards and specifications.
– Explain to the operator how the system works.
– Make the operator aware of his obligation to inspect and maintain the unit.
– Hand over all operating manuals to the operator.

1.1.3 Operator's obligations

To ensure that the unit gives optimum service, the operator must follow these instructions:
– Read and follow the instructions in the operating manual.
– Installation and start-up must be performed by appropriately qualified technicians.
– Make sure the installer explains how the system works.
– Perform all the necessary checks and maintenance.
– Keep the instructions in good condition and store them near the unit.
This unit is not intended for use by persons (including children) who have physical or mental disabilities or sensory
impairment or who have no experience or knowledge of the correct use of the unit, unless supervised or trained by a
person responsible for their safety. Children should be supervised to ensure they do not play with the unit.
4