Chapter 4: Print
4.1 Print from USB
1
Put the provided FELIX drive into the USB port
on the right-hand side of the display unit.
3
Make sure the print bed is clear of any obstruc-
tions. Select
to start printing.
FELIXprinters Quick Start Manual for the FELIX Pro 2 Touch
2
Enter the print menu by selecting the
the bottom center. Select the fi le Benchy Dual
from the USB list.
4
Cancel printing
Pause printing
Advanced print settings
Tip:
Select 'Benchy Dual PLA-PLA for a dual
extrusion sample, this will take 2 hr.
Select the Benchy Single PLA if you
want to print a quicker single extrusion
sample of 50 min.
icon in
5
The advanced option gives the control to override
Gcode settings during printing. For now leave
the settings as they were, select
to hide.
Page 18