Table of Contents
Advertisement
INTRODUCTION & CONTENT
Thank you for choosing the FELIX Pro 2 Touch.
This Quick Start guide contains the following information for you to familiarize yourself with your 3D printer, to use it
to its best advantages and to benefit fully from all the functions and the technical developments it incorporates.
It is well worth taking a few minutes to read this guide to familiarize yourself with the information and guidelines it
contains about the machine and its functions.
More manuals and tutorials can be found on
Chapter 1 – Unboxing
1.1 What's in the box?
1.2 Installing foot bracket
1.3 Installing display unit
Chapter 2 – Setup
2.1 Preparing the print bed
2.2 Installing filament accessoires and cables
2.3 Power on
Chapter 3 – Preparation
3.1 Display overview
3.2 Print bed calibration
3.3 Loading filament
3.4 Cleaning the print bed
FELIXprinters Quick Start Manual for the FELIX Pro 2 Touch
www.felixprinters.com/support
Chapter 4 – Print
4.1 Print from USB
4.2 Remove bed
4.3 Remove and finish printed object
Chapter 5 – Software, maintenance, support
5.1 Software
5.2 Setup cloud printing
5.3 Tips and tricks
5.4 Maintenance
5.5 Display messages
Require additional support?
Have a look at www.felixprinters.com/support
or at our user forum.
Page 3
Advertisement
Table of Contents
