Table of Contents
Advertisement
Chapter 3: Preparation
3.3 Load fi lament - Extruder 1 + 2
1
Enter the utilities menu by selecting the
in the far right bottom corner. Select E1
continue to the Extruder 1 submenu.
4
Never turn the printer off when the extruder is
above 100
C.
0
FELIXprinters Quick Start Manual for the FELIX Pro 2 Touch
2
icon
Select Load fi lament.
to
5
Select the
icon to show the loading tutorial.
Place the fi lament spool and load the fi lament
according to the instructions. Press
the tutorial.
3
Select your material, for our fi rst print we will use
PLA. These temperatures can be customized in
the previous menu under Change preset temp.
6
Press Extrude until a small thread of fi lament
comes out of the nozzle. Use the supplied
tweezer to remove the fi lament from the nozzle.
to hide
Press
when done. Repeat steps 1 - 6 for
extruder 2
Page 16
Advertisement
Table of Contents
