Felix printers Pro 2 Touch Quick Start Manual page 25

Chapter 5: Software, maintenance, support
5.4 Maintenance
Print bed contact points & Pins
Make sure to keep the contact points on the bottom
of the print bed clean. Use a detergent like alcohol
and rub gently with a paper towel or cloth.
FELIXprinters Quick Start Manual for the FELIX Pro 2 Touch FELIXprinters Quick Start Manual for the FELIX Pro 2 Touch
Dust cleaners
Filament attracts a lot of dust and small particles.
Make sure the filament enters the filament holder through
the dust cleaner. After a while replace the dust cleaners.
Page 25