Table of Contents
Advertisement
Chapter 3: Preparation
3.2 Print bed levelling
1
Enter the utilities menu by selecting the
in the far right bottom corner. Select BL to start
bed levelling.
4
Welcome to the print screen. This screen means
that the printer is busy performing a print job
or calibration. Wait until the calibration is com-
pleted.
FELIXprinters Quick Start Manual for the FELIX Pro 2 Touch
2
icon
Obstructions on the print bed like printed parts
could seriously damage the printer. After comfi r-
mation the printer will start the calibration.
3
Press
to start the bed levelling.
Calibrating extruders
Extruders only need to be calibrated after replacing the hot-
ends, or nozzles. Calibration can be performed by running
the build in XY and Z calibration found in the Utilities menu.
Page 15
Advertisement
Table of Contents
