Dräger Savina Instructions For Use Manual page 119

Performance data
Control principle
Intermittent PEEP frequency
Medicament nebulisation
(with O supply only)
2
Oxygen enrichment for bronchial suction
(with O supply only)
2
disconnection detection
reconnection detection
oxygen enrichment
active suction phase
final oxygen enrichment
Supply system for spontaneous breathing and ASB
max. inspiratory flow
Equipment compliance
(with Fisher & Paykel MR 730 humidifier
and adult patient hose system)
Inspiration resistance
Expiratory resistance
Equipment compliance
(with Fisher & Paykel MR 730 humidifier
and tubing system for paediatric use)
Inspiration resistance
Expiration resistance
Additional functions
Inspiratory relief valve
Safety valve
Measured value displays
Airway pressure measurement
(resistive relative pressure sensor)
Max. airway pressure
Plateau pressure
Pos. end-exp. pressure
Mean airway pressure
Range
Resolution
Accuracy
Inspiratory O measurement:
2
(maintenance-free electrochemical sensor)
Inspiratory O concentration FiO
2
Range
Resolution
Accuracy
* BTPS
Body Temperature, Pressure, Saturated.
Measured values with reference to the conditions of the patient's lung,
o
body temperature 37 C, ambient pressure, steam-saturated gas.
Time-cycled, volume-constant, pressure-controlled
2 cycles every 3 minutes
For a maximum of 30 minutes, in the inspiratory flow phase,
2 bar, max. 10 L/min.,
Savina takes the nebulizer flow into account and keeps the
minute-volume constant
automatic
automatic
max. 3 minutes with 100 vol.% O
max. 2 minutes
2 minutes with 100 vol.% O
Blower with quick-action pressure control valve
180 L/min, BTPS*
≤2 mL/mbar
≤2.3 mbar/60 L/min
≤3.8 mbar/60 L/min
≤1 mL/mbar
≤4.1 mbar/30 L/min
≤4.1 mbar/30 L/min
opens breathing system in case of failure
opens the breathing system at 100 mbar.
P
Peak
P
Plat
PEEP
P
Mean
0 to 99 mbar
1 mbar
±2 mbar
2
18 to 100 vol.%
1 vol.%
±3 vol.%
2
2
Technical data
119