Storage Controller Specifications; Drive Specifications; Hard Drives; Optical Drive - Dell E33S001 Owner's Manual

Power supply Specification
unit
Voltage
100–240 V AC, autoranging, 50/60 Hz

Storage controller specifications

Storage Specification
controller
Storage controller PERC H730, PERC H330, PERC H830, PERC S130.
type

Drive specifications

Hard drives

The PowerEdge R230 system supports SAS, SATA, Nearline SAS hard drives and Solid State Drives (SSDs).
Drives Specification
Four hard drive Up to four 3.5-inch cabled hard drives, or
systems
Up to four 2.5-inch hot swappable SATA, or Nearline SAS hard drives in 3.5-inch adapters, or
Up to four 3.5-inch hot swappable SATA, or Nearline SAS hard drives
Two hard drive Up to two 3.5-inch cabled hard drives
systems

Optical drive

The PowerEdge R230 system supports one optional slim SATA DVD-ROM drive or DVD+/-RW drive.

Ports and connectors specifications

USB ports

The PowerEdge R230 system supports:
• USB 2.0-compliant ports on the front panel
NOTE: This system is also designed to be connected to IT power systems with a phase-to-phase voltage
not exceeding 230 V.
NOTE: Your system supports software RAID S130 and a PERC card.
For more information on software RAID, see the Dell PowerEdge RAID Controller (PERC) documentation at
Dell.com/storagecontrollermanuals.
NOTE: The upgrade from embedded controller or Software RAID controller to Hardware RAID controller
is not supported.
Technical specifications 27